NEW PAGE ON HEAT MUFF ROTAX 582

KITFOX INFO, WEATHER ROTAX DEALER AND PARTS KINGFOX TIRES

Heater Muff on Rotax 582.

size is about 14 inches wide by 9 inches. One long door spring about 16 inches or so attached to each side and stuffed inside the shield to retain the Pot scrubbers. You have to have sometyhing to slow the air down or you will end up with unheated air coming through.

heat muff right front

Left front Heater Muff

 

2 scat tubes 1 1/2" hook to one hole on each side between the rudder pedals.

SCAT  Pipe

Scat Tube into Cabin at Rudder pedals

Tube into Cabin at Rudder pedals

Scat Tube into Cabin at Rudder pedals

Tube into Cabin at Rudder pedals   RIght side

 

NGK plugs are NOT the same .

The ones you buy from most automotive stores are Screw tips not Solid and they will wear like the pics below. Plus they are gapped at .035 and it hard to adjust down to .018.

If you buy them from ROTAX shop you will get them pre gapped at .018 and will look like THIS

The problem with using screw tip NGK plugs

Go HERE to see the differnence in gaps

Note the Blackened Alum tips that are showing wear on left side HERE